User`s guide

NetAtlas Enterprise Ethernet Switch Manager User’s Guide
Chapter 14 Switch Configuration 124
Figure 84 Switch Configuration: MAC Forwarding
The following table describes the labels in this screen.
3 To add a new rule, click Add in the MAC Forwarding screen. A screen displays as
shown. To change the settings of a rule, select a rule and click Add in the previous
screen.
Figure 85 Switch Configuration: MAC Forwarding: Add
Table 56 Switch Configuration: MAC Forwarding
LABEL DESCRIPTION
Index Click an index number to modify a static MAC address rule for a port.
Active This field displays whether this static MAC address forwarding rule is active (Yes) or
not (No). You may temporarily deactivate a rule without deleting it.
MAC Address This field displays the MAC address that will be forwarded and the VLAN identification
number to which the MAC address belongs.
VID This field displays the VLAN identification number.
Port This field displays the port where the MAC address shown in the next field will be
forwarded.
Add Click the Add button to create a MAC forwarding rule.
Delete Select the rule(s) that you want to remove in the MAC Forwarding table and then click
the Delete button.