User`s guide

NetAtlas Enterprise Ethernet Switch Manager User’s Guide
119 Chapter 14 Switch Configuration
The following table describes the labels in this screen.
14.5 GARP Timer
Switches join VLANs by making a declaration. A declaration is made by issuing a Join
message using GARP. Declarations are withdrawn by issuing a Leave message. A Leave All
message terminates all registrations. GARP timers set declaration timeout values. See the
chapter on VLAN setup for more background information.
1 In the Device Panel list, select a device and then right-click.
2 Click Configuration, Switch Configuration and then the Switch Setup tab.
3 Select the GARP Timer check box and then click Apply.
4 Click Configuration, Switch Configuration and then the GARP Timer tab to display
the following screen.
Table 51 Switch Configuration: DHCP Relay
LABEL DESCRIPTION
DHCP Relay
Service
Relay Option82 From the drop-down list box, select Enable to have the switch add information (slot
number, port number and VLAN ID) to client TCP/IP configuration requests that it
relays to a DHCP server. Otherwise, select Disable.
Information This read-only field displays the system name you configure in the System Info.
screen.
DHCP Server
1.. 3
Enter the IP address(es) of the DHCP server(s).
Apply Click Apply to save the settings.