User`s guide

NetAtlas Enterprise Ethernet Switch Manager User’s Guide
Chapter 14 Switch Configuration 110
CHAPTER 14
Switch Configuration
This chapter shows how to configure priority queuing, STP, link aggregation, DHCP relay,
GARP timer and RADIUS.
14.1 Switch Setup
Use the switch setup screen to set a VLAN type, a queuing method and enable or disable
features in the Active Control panel.
1 In the Device Panel list, select a device and then right-click.
2 Click Configuration, Switch Configuration. The Switch Setup screen displays. This
screen varies depending on your switch models.
Figure 73 Switch Configuration: Switch Setup (ES-2024A)