3G Wireless Router User's Guide

Chapter 1 Getting to Know Your ZyXEL Device
NBG410W3G Series User’s Guide
40
3G
OPERATION
Green On The ZyXEL Device has a successful 3G connection.
Flashing The ZyXEL Device has detected an available 3G network,
but has not yet connected to it.
Blue On The ZyXEL Device has a successful 3.5G connection
Flashing The ZyXEL Device has detected an available 3.5G network,
but has not yet connected to it.
Orange On The ZyXEL Device has a successful 2G or 2.5G connection
Flashing The ZyXEL Device has detected an available 2G or 2.5G
network, but has not yet connected to it.
Off One (or more) of the following has occurred.
The 3G function is not activated.
The ZyXEL Device is not registered with a 3G network.
The ZyXEL Device is using a 3G USB dongle for 3G
connection.
3G SIGNAL
STRENGTH
Green On The 3G signal is strong.
Yellow The 3G signal is moderate.
Red The 3G signal is weak.
Off If the 3G OPERATION LED is off, there is no 3G connection,
or the ZyXEL Device is using a 3G USB dongle for a 3G
connection.
If the 3G OPERATION LED is not off, no 3G signal is
detected.
Table 2 NBG412W3G Front Panel Lights
LED ICONS COLOR STATUS DESCRIPTION
POWER Off The ZyXEL Device is turned off.
Green On The ZyXEL Device is ready and running.
Flashing The ZyXEL Device is restarting.
Red On The power to the ZyXEL Device is too low.
LAN/DMZ 10/
100
Off The LAN/DMZ is not connected.
Green On The ZyXEL Device has a successful 10Mbps Ethernet
connection.
Flashing The 10M LAN is sending or receiving packets.
Orange On The ZyXEL Device has a successful 100Mbps Ethernet
connection.
Flashing The 100M LAN is sending or receiving packets.
WAN Off The WAN connection is not ready, or has failed.
Green On The ZyXEL Device has a successful 10Mbps WAN
connection.
Flashing The 10M WAN is sending or receiving packets.
Orange On The ZyXEL Device has a successful 100Mbps WAN
connection.
Flashing The 100M WAN is sending or receiving packets.
Table 1 NBG410W3G Front Panel Lights (continued)
LED ICONS COLOR STATUS DESCRIPTION