3G Wireless Router User's Guide

Chapter 6 WAN Screens
NBG410W3G Series User’s Guide
134
6.11 Configuring Traffic Redirect
To change your ZyXEL Device’s traffic redirect settings, click NETWORK > WAN > Traffic
Redirect. The screen appears as shown.
Figure 78 NETWORK > WAN > Traffic Redirect
The following table describes the labels in this screen.
Internet
WAN
LAN
Backup Gateway
Subnet 2
192.168.2.0 - 192.168.2.24
Subnet 1
192.168.1.0 - 192.168.1.24
Table 23 NETWORK > WAN > Traffic Redirect
LABEL DESCRIPTION
Active Select this check box to have the ZyXEL Device use traffic redirect if the normal WAN
connection goes down.
Backup
Gateway IP
Address
Type the IP address of your backup gateway in dotted decimal notation. The ZyXEL
Device automatically forwards traffic to this IP address if the ZyXEL Device's Internet
connection terminates.
Apply Click Apply to save your changes.
Reset Click Reset to begin configuring this screen afresh.