User`s guide
Table Of Contents
- About This User's Guide
- Document Conventions
- Safety Warnings
- Table of Contents
- Part I: Introduction
- 1. Getting to Know Your MWR222
- 2.
- 2. Introducing the Web Configurator
- 3. Monitor
- 4.
- 4.
- 4. MWR222 Modes
- 5. Router Mode
- 6. Access Point Mode
- 5.
- 5.
- 7. WISP Mode
- 7
- 7
- 8 Tutorials
- 8.3 Connecting to Internet from an Access Point
- 8.4 Configuring Wireless Security Using WPS
- 9 Wireless LAN
- 9.1 Overview
- 9.2 What You Can Do
- Use the General screen to enable the Wireless LAN, enter the SSID and select the wireless security mode.
- 9.3 What You Should Know
- 9.4 General Wireless LAN Screen
- 9.5 Security
- 9.6 MAC Filter
- 9.7 Wireless LAN Advanced Screen
- 9.8 Quality of Service (QoS) Screen
- 9.9 WPS Screen
- 9.10 WPS Station Screen
- 9.11 Scheduling Screen
- 9.12 WDS Screen
- 10.1 Overview
- 10.2 What You Can Do
- 10.3 What You Need To Know
- 10.2
- 10.3
- 10.4 Internet Connection
- 10.5 Mobile WAN
- 10.7 IGMP Snooping Screen
- 11 LAN
- 12 DHCP Server
- 13. Network Address Translation (NAT)
- 14 Dynamic DNS
- 15. OpenDNS
- 16 Static Route
- 17.
- 17.
- 17. Routing Information Protocol
- Part III
- Part V
- Maintenance and Troubleshooting
- Part VI
- Appendices and Index
- Appendix A
- Pop-up Windows, JavaScripts and Java Permissions
- End-User License Agreement for “MWR222”
- NOTE: Some components of this product incorporate free software programs covered under the open source code licenses which allows you to freely copy, modify and redistribute the software. For at least three (3) years from the date of distribution of t...
- Notice
- Information herein is subject to change without notice. Companies, names, and data used in examples herein are fictitious unless otherwise noted. No part may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any p...
- Notice
- GNU GENERAL PUBLIC LICENSE
- GNU LESSER GENERAL PUBLIC LICENSE
MWR211 User’s Guide
52
Figure 21 Network > LAN > IP
The table below describes the labels in the screen.
Table 13 Network > LAN > IP
LABEL DESCRIPTION
Get from
DHCP Server
Click this to deploy the MWR222 as an access point in the network.
When you enable this, the MWR222 gets its IP address from the
network’s DHCP server (for example, your ISP). Users connected to the
MWR222 can now access the network (i.e., the Internet if the IP address
is given by the ISP).
The Web Configurator may no longer be accessible unless you know the
IP address assigned by the DHCP server to the MWR222. You need to
reset the MWR222 to be able to access the Web Configurator again.
Also when you select this, you cannot enter an IP address for your
MWR222 in the field below.
Use Defined
LAN IP
Address
Click this if you want to specify the IP address of your MWR222. Or if
your ISP or network administrator gave you a static IP address to access
the network or the Internet.
IP Address
Type the IP address in dotted decimal notation. The default setting is
192.168.10.2. If you change the IP address you will have to log in again
with the new IP address.
IP Subnet
Mask
The subnet mask specifies the network number portion of an IP address.
Your MWR222 will automatically calculate the subnet mask based on the
IP address that you assign. Unless you are implementing subnetting, use
the subnet mask computed by the MWR222.
Gateway IP
Address
Enter a Gateway IP Address (if your ISP or network administrator gave
you one) in this field.
DNS Assignment