User`s guide
Table Of Contents
- About This User's Guide
- Document Conventions
- Safety Warnings
- Table of Contents
- Part I: Introduction
- 1. Getting to Know Your MWR222
- 2.
- 2. Introducing the Web Configurator
- 3. Monitor
- 4.
- 4.
- 4. MWR222 Modes
- 5. Router Mode
- 6. Access Point Mode
- 5.
- 5.
- 7. WISP Mode
- 7
- 7
- 8 Tutorials
- 8.3 Connecting to Internet from an Access Point
- 8.4 Configuring Wireless Security Using WPS
- 9 Wireless LAN
- 9.1 Overview
- 9.2 What You Can Do
- Use the General screen to enable the Wireless LAN, enter the SSID and select the wireless security mode.
- 9.3 What You Should Know
- 9.4 General Wireless LAN Screen
- 9.5 Security
- 9.6 MAC Filter
- 9.7 Wireless LAN Advanced Screen
- 9.8 Quality of Service (QoS) Screen
- 9.9 WPS Screen
- 9.10 WPS Station Screen
- 9.11 Scheduling Screen
- 9.12 WDS Screen
- 10.1 Overview
- 10.2 What You Can Do
- 10.3 What You Need To Know
- 10.2
- 10.3
- 10.4 Internet Connection
- 10.5 Mobile WAN
- 10.7 IGMP Snooping Screen
- 11 LAN
- 12 DHCP Server
- 13. Network Address Translation (NAT)
- 14 Dynamic DNS
- 15. OpenDNS
- 16 Static Route
- 17.
- 17.
- 17. Routing Information Protocol
- Part III
- Part V
- Maintenance and Troubleshooting
- Part VI
- Appendices and Index
- Appendix A
- Pop-up Windows, JavaScripts and Java Permissions
- End-User License Agreement for “MWR222”
- NOTE: Some components of this product incorporate free software programs covered under the open source code licenses which allows you to freely copy, modify and redistribute the software. For at least three (3) years from the date of distribution of t...
- Notice
- Information herein is subject to change without notice. Companies, names, and data used in examples herein are fictitious unless otherwise noted. No part may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any p...
- Notice
- GNU GENERAL PUBLIC LICENSE
- GNU LESSER GENERAL PUBLIC LICENSE
MWR211 User’s Guide
42
Advanced Use this screen to configure other advanced properties.
IGMP
Snooping
Use this screen to enable IGMP snooping if you have LAN
users that subscribe to multicast services.
LAN
IP
Use this screen to configure LAN IP address and subnet
mask.
IP Alias
Use this screen to have the MWR222 apply IP alias to
create LAN subnets.
DHCP
Server
General
Use this screen to enable the MWR222’s DHCP server.
See Chapter 12 for more information about DHCP.
Advanced
Use this screen to assign IP addresses to specific
individual computers based on their MAC addresses and
to have DNS servers assigned by the DHCP server.
NAT
General
Use this screen to enable NAT. See Chapter 13 for more
information about NAT
Application Use this screen to configure servers behind the MWR222.
Advanced
Use this screen to change your MWR222’s port triggering
settings.
DDNS
General
Use this screen to set up dynamic DNS. See Chapter 14
for more information about DDNS.
OpenDNS
General Use this screen to set up OpenDNS.
Static
Route
IP Static
Route
Use this screen to configure IP static routes.
RIP
Use this screen to enable RIPv1 or RIPv2, which are LAN
broadcast protocols.
Security
Firewall
General Use this screen to activate/deactivate the firewall.