User`s guide
Table Of Contents
- About This User's Guide
- Document Conventions
- Safety Warnings
- Table of Contents
- Part I: Introduction
- 1. Getting to Know Your MWR222
- 2.
- 2. Introducing the Web Configurator
- 3. Monitor
- 4.
- 4.
- 4. MWR222 Modes
- 5. Router Mode
- 6. Access Point Mode
- 5.
- 5.
- 7. WISP Mode
- 7
- 7
- 8 Tutorials
- 8.3 Connecting to Internet from an Access Point
- 8.4 Configuring Wireless Security Using WPS
- 9 Wireless LAN
- 9.1 Overview
- 9.2 What You Can Do
- Use the General screen to enable the Wireless LAN, enter the SSID and select the wireless security mode.
- 9.3 What You Should Know
- 9.4 General Wireless LAN Screen
- 9.5 Security
- 9.6 MAC Filter
- 9.7 Wireless LAN Advanced Screen
- 9.8 Quality of Service (QoS) Screen
- 9.9 WPS Screen
- 9.10 WPS Station Screen
- 9.11 Scheduling Screen
- 9.12 WDS Screen
- 10.1 Overview
- 10.2 What You Can Do
- 10.3 What You Need To Know
- 10.2
- 10.3
- 10.4 Internet Connection
- 10.5 Mobile WAN
- 10.7 IGMP Snooping Screen
- 11 LAN
- 12 DHCP Server
- 13. Network Address Translation (NAT)
- 14 Dynamic DNS
- 15. OpenDNS
- 16 Static Route
- 17.
- 17.
- 17. Routing Information Protocol
- Part III
- Part V
- Maintenance and Troubleshooting
- Part VI
- Appendices and Index
- Appendix A
- Pop-up Windows, JavaScripts and Java Permissions
- End-User License Agreement for “MWR222”
- NOTE: Some components of this product incorporate free software programs covered under the open source code licenses which allows you to freely copy, modify and redistribute the software. For at least three (3) years from the date of distribution of t...
- Notice
- Information herein is subject to change without notice. Companies, names, and data used in examples herein are fictitious unless otherwise noted. No part may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any p...
- Notice
- GNU GENERAL PUBLIC LICENSE
- GNU LESSER GENERAL PUBLIC LICENSE

MWR211 User’s Guide
41
WLAN Station
Status
Use this screen to view the wireless stations that are
currently associated to the MWR222.
MWAN MGMT
Monitor
Use this screen to view the MWAN connection
information.
CONFIGURATION
Network
Wireless
LAN
General Use this screen to configure wireless LAN.
MAC Filter
Use the MAC filter screen to configure the MWR222 to
block access to devices or block the devices from
accessing the MWR222.
Advanced
This screen allows you to configure advanced wireless
settings.
QoS
Use this screen to configure Wi-Fi Multimedia Quality of
Service (WMM QoS). WMM QoS allows you to prioritize
wireless traffic according to the delivery requirements of
individual services.
WPS Use this screen to configure WPS (Wi-Fi Protected Setup).
WPS
Station
Use this screen to add a wireless station using WPS (Wi-Fi
Protected Setup).
Scheduling
Use this screen to schedule the times the Wireless LAN is
enabled.
WDS
Use this screen to set up Wireless Distribution System
(WDS) on your MWR222. See Chapter 9.12 for more
information on the Wireless Distribution System.
WAN
Wired WAN
This screen allows you to configure ISP parameters, WAN
IP address assignment, DNS servers and the WAN MAC
address for your Wired WAN connection.
Mobile WAN
This screen allows you to configure mobile ISP
parameters, WAN IP address assignment, Data Usage,
Failover, DNS servers, and the WAN MAC address for your
Mobile WAN connection.