User`s guide
Table Of Contents
- About This User's Guide
- Document Conventions
- Safety Warnings
- Table of Contents
- Part I: Introduction
- 1. Getting to Know Your MWR222
- 2.
- 2. Introducing the Web Configurator
- 3. Monitor
- 4.
- 4.
- 4. MWR222 Modes
- 5. Router Mode
- 6. Access Point Mode
- 5.
- 5.
- 7. WISP Mode
- 7
- 7
- 8 Tutorials
- 8.3 Connecting to Internet from an Access Point
- 8.4 Configuring Wireless Security Using WPS
- 9 Wireless LAN
- 9.1 Overview
- 9.2 What You Can Do
- Use the General screen to enable the Wireless LAN, enter the SSID and select the wireless security mode.
- 9.3 What You Should Know
- 9.4 General Wireless LAN Screen
- 9.5 Security
- 9.6 MAC Filter
- 9.7 Wireless LAN Advanced Screen
- 9.8 Quality of Service (QoS) Screen
- 9.9 WPS Screen
- 9.10 WPS Station Screen
- 9.11 Scheduling Screen
- 9.12 WDS Screen
- 10.1 Overview
- 10.2 What You Can Do
- 10.3 What You Need To Know
- 10.2
- 10.3
- 10.4 Internet Connection
- 10.5 Mobile WAN
- 10.7 IGMP Snooping Screen
- 11 LAN
- 12 DHCP Server
- 13. Network Address Translation (NAT)
- 14 Dynamic DNS
- 15. OpenDNS
- 16 Static Route
- 17.
- 17.
- 17. Routing Information Protocol
- Part III
- Part V
- Maintenance and Troubleshooting
- Part VI
- Appendices and Index
- Appendix A
- Pop-up Windows, JavaScripts and Java Permissions
- End-User License Agreement for “MWR222”
- NOTE: Some components of this product incorporate free software programs covered under the open source code licenses which allows you to freely copy, modify and redistribute the software. For at least three (3) years from the date of distribution of t...
- Notice
- Information herein is subject to change without notice. Companies, names, and data used in examples herein are fictitious unless otherwise noted. No part may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any p...
- Notice
- GNU GENERAL PUBLIC LICENSE
- GNU LESSER GENERAL PUBLIC LICENSE
MWR211 User’s Guide
340
18. Dave Hart <davehart@davehart.com> General maintenance,
Windows port interpolation rewrite.
19. Claas Hilbrecht <neoclock4x@linum.com> NeoClock4X clock
driver
20. Glenn Hollinger <glenn@herald.usask.ca> GOES clock driver
21. Mike Iglesias <iglesias@uci.edu> DEC Alpha port
22. Jim Jagielski <jim@jagubox.gsfc.nasa.gov> A/UX port
23. Jeff Johnson <jbj@chatham.usdesign.com> massive
prototyping overhaul
24. Hans Lambermont <Hans.Lambermont@nl.origin-it.com> or
<H.Lambermont@chello.nl> ntpsweep
25. Poul-Henning Kamp <phk@FreeBSD.ORG> Oncore driver
(Original author)
26. Frank Kardel <kardel (at) ntp (dot) org> PARSE <GENERIC>
driver (>14 reference clocks), STREAMS modules for PARSE,
support scripts, syslog cleanup, dynamic interface handling
27. William L. Jones <jones@hermes.chpc.utexas.edu> RS/6000
AIX modifications, HPUX modifications
28. Dave Katz <dkatz@cisco.com> RS/6000 AIX port
29. Craig Leres <leres@ee.lbl.gov> 4.4BSD port, ppsclock,
Magnavox GPS clock driver
30. George Lindholm <lindholm@ucs.ubc.ca> SunOS 5.1 port
31. Louis A. Mamakos <louie@ni.umd.edu> MD5-based
authentication
32. Lars H. Mathiesen <thorinn@diku.dk> adaptation of
foundation code for Version 3 as specified in RFC-1305
33. Danny Mayer <mayer@ntp.org>Network I/O, Windows Port,
Code Maintenance
34. David L. Mills <mills@udel.edu> Version 4 foundation: clock
discipline, authentication, precision kernel; clock drivers:
Spectracom, Austron, Arbiter, Heath, ATOM, ACTS, KSI/Odetics;
audio clock drivers: CHU, WWV/H, IRIG
35. Wolfgang Moeller <moeller@gwdgv1.dnet.gwdg.de> VMS port
36. Jeffrey Mogul <mogul@pa.dec.com> ntptrace utility
37. Tom Moore <tmoore@fievel.daytonoh.ncr.com> i386 svr4
port