User`s guide
Table Of Contents
- About This User's Guide
- Document Conventions
- Safety Warnings
- Table of Contents
- Part I: Introduction
- 1. Getting to Know Your MWR222
- 2.
- 2. Introducing the Web Configurator
- 3. Monitor
- 4.
- 4.
- 4. MWR222 Modes
- 5. Router Mode
- 6. Access Point Mode
- 5.
- 5.
- 7. WISP Mode
- 7
- 7
- 8 Tutorials
- 8.3 Connecting to Internet from an Access Point
- 8.4 Configuring Wireless Security Using WPS
- 9 Wireless LAN
- 9.1 Overview
- 9.2 What You Can Do
- Use the General screen to enable the Wireless LAN, enter the SSID and select the wireless security mode.
- 9.3 What You Should Know
- 9.4 General Wireless LAN Screen
- 9.5 Security
- 9.6 MAC Filter
- 9.7 Wireless LAN Advanced Screen
- 9.8 Quality of Service (QoS) Screen
- 9.9 WPS Screen
- 9.10 WPS Station Screen
- 9.11 Scheduling Screen
- 9.12 WDS Screen
- 10.1 Overview
- 10.2 What You Can Do
- 10.3 What You Need To Know
- 10.2
- 10.3
- 10.4 Internet Connection
- 10.5 Mobile WAN
- 10.7 IGMP Snooping Screen
- 11 LAN
- 12 DHCP Server
- 13. Network Address Translation (NAT)
- 14 Dynamic DNS
- 15. OpenDNS
- 16 Static Route
- 17.
- 17.
- 17. Routing Information Protocol
- Part III
- Part V
- Maintenance and Troubleshooting
- Part VI
- Appendices and Index
- Appendix A
- Pop-up Windows, JavaScripts and Java Permissions
- End-User License Agreement for “MWR222”
- NOTE: Some components of this product incorporate free software programs covered under the open source code licenses which allows you to freely copy, modify and redistribute the software. For at least three (3) years from the date of distribution of t...
- Notice
- Information herein is subject to change without notice. Companies, names, and data used in examples herein are fictitious unless otherwise noted. No part may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any p...
- Notice
- GNU GENERAL PUBLIC LICENSE
- GNU LESSER GENERAL PUBLIC LICENSE
MWR211 User’s Guide
291
libm 0.9.28 http://www.uclibc.org/
LGPL 2.1
libnsl
0.9.28
http://www.uclibc.org/
LGPL 2.1
libnvram 0.9.28 http://www.uclibc.org/
LGPL 2.1
libpthread
0.9.28
http://www.uclibc.org/
LGPL 2.1
libresolv 0.9.28 http://www.uclibc.org/
LGPL 2.1
libusb-
0.1.12
0.1.12
http://www.libusb.org/
LGPL 2.1
libusb-
1.0.0
1.0.0 http://www.libusb.org/
LGPL 2.1
libutil 0.9.28 http://www.uclibc.org/
LGPL 2.1
lsusb
1.0.0
http://www.libusb.org/
LGPL 2.1
lzma-
4.32.0beta
5
4.32beta
5
http://sourceforge.net/project
s/sevenzip/files/LZMA%20SDK
/
LGPL 2.1
mkimage mkimage http://packages.debian.org/si
d/uboot-mkimage
GPL 2.0
mksquash_
lzma-3.2
lzma sdk
4.43
squashfs
3.2-r2
http://sourceforge.net/project
s/sevenzip/files/LZMA%20SDK
/
http://squashfs.sourceforge.n
et/
LGPL 2.1
lzma sdk
4.43
4.43 http://sourceforge.net/project
s/sevenzip/files/LZMA%20SDK
/
LGPL 2.1
squashfs
3.2-r2
3.2-r2 http://squashfs.sourceforge.n
et/ GPL 2.0
mtd_write mtd_writ
e
http://downloads.openwrt.org/
sources/
GPL 2.0
ntp-4.1.2 4.1.2 http://www.eecis.udel.edu/~n
tp/ntp_spool/ntp4/ntp-4.1/
NTP
ntpclient
2003_19
4
http://doolittle.icarus.com/ntp
client/
GPL 2.0
openssl-
0.9.8e
0.9.8e
http://www.openssl.org
BSD
pciutils-
3.0.0
3.0.0
http://www.kernel.org/pub/sof
tware/utils/pciutils
GPL 2.0
pkg-config 0.23 http://pkg-
config.freedesktop.org
GPL 2.0
radvd-1.0 1.0 http://www.litech.org/radvd/
RADVD
sdparm-
1.02
1.02
http://sg.danny.cz/sg/sdparm.
html
SNMPD
snmpd
snmpd
http://www.net-snmp.org/
BSD
usb-
modeswitc
h-1.1.0
1.1.0 http://www.draisberghof.de/u
sb_modeswitch/
GPL 2.0
wsc_upnp 0.1.1 http://www.ralinktech.com/ or
http://rt2x00.serialmonkey.co
m/wiki/index.php/Main_Page
Ralink
and Intel
Sprint4GD
eveloperPa
ck
1.1
https://developer.sprint.com/g
etDocument.do?docld=101032
GPL 2.0
& BSD