User`s guide

MWR211 User’s Guide
172
Table 57 Bandwidth Management Rule Configuration: User-defined Service
LABEL DESCRIPTION
BW Budget
Select Maximum Bandwidth or Minimum Bandwidth and specify
the maximum or minimum bandwidth allowed for the rule in kilobits
per second.
Destination
Address
Enter the IP address of the destination computer.
The MWR222 applies bandwidth management to the service or
application that is entering this computer.
Destination
Subnet
Netmask
Enter the subnet netmask of the destination of the traffic for which the
bandwidth management rule applies.
Destination Port
This is the port number of the destination that define the traffic type,
for example TCP port 80 defines web traffic.
Source Address
Enter the IP address of the computer that initializes traffic for the
application or service.
The MWR222 applies bandwidth management to traffic initiating from
this computer.
Source Subnet
Netmask
Enter the subnet netmask of the computer initiating the traffic for
which the bandwidth management rule applies.
Source Port
This is the port number of the source that define the traffic type, for
example TCP port 80 defines web traffic.
Protocol
Select the protocol (TCP, UDP, User defined) for which the
bandwidth management rule applies.
If you select User-defined
, enter the protocol for which the bandwidth
management rule applies. For example, ICMP for ping traffic.
Apply Click Apply to save your customized settings.
Cancel Click Cancel to exit this screen without saving.
See Appendix E for commonly used services and port numbers.