User`s guide

Chapter 9 The NAT Configuration Screens
User’s Guide
95
Figure 51 Multiple Servers Behind NAT Example
9.3.1 Port Forwarding Options
Click ADVANCED > NAT Configuration > Port Forwarding to look at the current port-
forwarding rules in the WiMAX Modem, and to enable, disable, activate, and deactivate each
one. You can also set up a default server to handle ports not covered by rules.
Figure 52 ADVANCED > NAT Configuration > Port Forwarding
The following table describes the icons in this screen.
The following table describes the labels in this screen.
Table 34 Advanced> VPN Transport > Customer Interface
ICON DESCRIPTION
Edit
Click to edit this item.
Delete
Click to delete this item.
Table 35 ADVANCED > NAT Configuration > Port Forwarding
LABEL DESCRIPTION
Default Server Setup
Default Server
Enter the IP address of the server to which the WiMAX Modem should forward
packets for ports that are not specified in the Port Forwarding section below or in
the TOOLS > Remote MGMT screens. Enter 0.0.0.0 if you want the WiMAX
Modem to discard these packets instead.