User`s guide

Chapter 20 The Status Screen
User’s Guide
211
Hook This field indicates whether the phone is on the hook or off the hook.
On - The phone is hanging up or already hung up.
Off - The phone is dialing, calling, or connected.
Status This field displays the current state of the phone call.
N/A - There are no current VoIP calls, incoming calls or outgoing calls being
made.
DIAL - The callee’s phone is ringing.
RING - The phone is ringing for an incoming VoIP call.
Process - There is a VoIP call in progress.
DISC - The callee’s line is busy, the callee hung up or your phone was left off the
hook.
Codec This field displays what voice codec is being used for a current VoIP call through a
phone port.
Peer Number This field displays the SIP number of the party that is currently engaged in a VoIP
call through a phone port.
Duration This field displays how long the current call has lasted.
Tx Pkts This field displays the number of packets the WiMAX Modem has transmitted in
the current call.
Rx Pkts This field displays the number of packets the WiMAX Modem has received in the
current call.
Tx B/s This field displays how quickly the WiMAX Modem has transmitted packets in the
current call. The rate is the average number of bytes transmitted per second.
Rx B/s This field displays how quickly the WiMAX Modem has received packets in the
current call. The rate is the average number of bytes transmitted per second.
Poll Interval(s) Enter how often you want the WiMAX Modem to update this screen, and click Set
Interval.
Set Interval Click this to make the WiMAX Modem update the screen based on the amount of
time you specified in Poll Interval.
Stop Click this to make the WiMAX Modem stop updating the screen.
Table 105 VoIP Statistics
LABEL DESCRIPTION