User`s guide

Chapter 20 The Status Screen
User’s Guide
210
20.2.4 VoIP Statistics
Click Status > DHCP Table to open this screen. This read-only screen shows SIP registration
information, status of calls and VoIP traffic statistics. These settings can be configured in the
VOICE > Service Configuration > SIP Setting screen.
Figure 119 VoIP Statistics
Each field is described in the following table.
Table 105 VoIP Statistics
LABEL DESCRIPTION
SIP Status
Port This column displays each SIP account in the WiMAX Modem.
Status This field displays the current registration status of the SIP account. You can
change this in the Status screen.
Registered - The SIP account is registered with a SIP server.
Register Fail - The last time the WiMAX Modem tried to register the SIP account
with the SIP server, the attempt failed. The WiMAX Modem automatically tries to
register the SIP account when you turn on the WiMAX Modem or when you
activate it.
Inactive - The SIP account is not active. You can activate it in VOICE > SIP > SIP
Settings.
Last Registration This field displays the last time you successfully registered the SIP account. It
displays N/A if you never successfully registered this account.
URI This field displays the account number and service domain of the SIP account.
You can change these in VOICE > SIP > SIP Settings.
Protocol This field displays the transport protocol the SIP account uses. SIP accounts
always use UDP.
Message Waiting This field indicates whether or not there are any messages waiting for the SIP
account.
Last Incoming
Number
This field displays the last number that called the SIP account. It displays N/A if no
number has ever dialed the SIP account.
Last Outgoing
Number
This field displays the last number the SIP account called. It displays N/A if the
SIP account has never dialed a number.
Call Statistics
Phone This field displays the WiMAX Modem’s phone port number.