User`s guide

Chapter 20 The Status Screen
User’s Guide
208
The following table describes the fields in this screen.
20.2.2 WiMAX Site Information
Click Status > WiMAX Site Information to open this screen. This read-only screen shows
WiMAX frequency information for the WiMAX Modem. These settings can be configured in
the ADVANCED > WAN Configuration > WiMAX Configuration screen.
Figure 117 WiMAX Site Information
Table 102 Packet Statistics
LABEL DESCRIPTION
Port This column displays each interface of the WiMAX Modem.
Status This field indicates whether or not the WiMAX Modem is using the interface.
For the WAN interface, this field displays the port speed and duplex setting when
the WiMAX Modem is connected to a WiMAX network, and Down when the
WiMAX Modem is not connected to a WiMAX network.
For the LAN interface, this field displays the port speed and duplex setting when
the WiMAX Modem is using the interface and Down when the WiMAX Modem is
not using the interface.
For the WLAN interface, it displays the transmission rate when WLAN is enabled
or Down when WLAN is disabled.
TxPkts This field displays the number of packets transmitted on this interface.
RxPkts This field displays the number of packets received on this interface.
Collisions This field displays the number of collisions on this port.
Tx B/s This field displays the number of bytes transmitted in the last second.
Rx B/s This field displays the number of bytes received in the last second.
Up Time This field displays the elapsed time this interface has been connected.
System up Time This is the elapsed time the system has been on.
Poll Interval(s) Type the time interval for the browser to refresh system statistics.
Set Interval Click this button to apply the new poll interval you entered in the Poll Interval
field above.
Stop Click this button to halt the refreshing of the system statistics.