User`s guide

Chapter 20 The Status Screen
User’s Guide
207
20.2.1 Packet Statistics
Click Status > Packet Statistics to open this screen. This read-only screen displays
information about the data transmission through the WiMAX Modem. To configure these
settings, go to the corresponding area in the Advanced screens.
Figure 116 Packet Statistics
Registration This field displays the current registration status of the SIP account. You have to
register SIP accounts with a SIP server to use VoIP.
If the SIP account is already registered with the SIP server,
Click Unregister to delete the SIP account’s registration in the SIP server. This
does not cancel your SIP account, but it deletes the mapping between your SIP
identity and your IP address or domain name.
The second field displays Registered.
If the SIP account is not registered with the SIP server,
Click Register to have the WiMAX Modem attempt to register the SIP account
with the SIP server.
The second field displays the reason the account is not registered.
Inactive - The SIP account is not active. You can activate it in VOICE > SIP > SIP
Settings.
Register Fail - The last time the WiMAX Modem tried to register the SIP account
with the SIP server, the attempt failed. The WiMAX Modem automatically tries to
register the SIP account when you turn on the WiMAX Modem or when you
activate it.
URI This field displays the account number and service domain of the SIP account.
You can change these in VOICE > SIP > SIP Settings.
Table 101 Status (continued)
LABEL DESCRIPTION