User`s guide

Chapter 17 The Remote Management Screens
User’s Guide
174
The following table describes the labels in this screen.
17.4 FTP
Click TOOLS > Remote Management > FTP to control FTP access to your WiMAX
Modem.
Figure 95 TOOLS > Remote Management > FTP
The following table describes the labels in this screen.
Table 73 TOOLS > Remote Management > Telnet
LABEL DESCRIPTION
Server Port Enter the port number this service can use to access the WiMAX Modem. The
computer must use the same port number.
Server Access Select the interface(s) through which a computer may access the WiMAX Modem
using this service.
Secured Client IP
Address
Select All to allow any computer to access the WiMAX Modem using this service.
Select Selected to only allow the computer with the IP address that you specify to
access the WiMAX Modem using this service.
Apply
Click to save your changes.
Reset
Click to restore your previously saved settings.
Table 74 TOOLS > Remote Management > FTP
LABEL DESCRIPTION
Server Port Enter the port number this service can use to access the WiMAX Modem. The
computer must use the same port number.
Server Access Select the interface(s) through which a computer may access the WiMAX Modem
using this service.
Secured Client IP
Address
Select All to allow any computer to access the WiMAX Modem using this service.
Select Selected to only allow the computer with the IP address that you specify to
access the WiMAX Modem using this service.
Apply
Click to save your changes.
Reset
Click to restore your previously saved settings.