User`s guide

Chapter 14 The Certificates Screens
User’s Guide
146
If you configured the My Certificate Create screen to have the WiMAX Modem enroll a
certificate and the certificate enrollment is not successful, you see a screen with a Return
button that takes you back to the My Certificate Create screen. Click Return and check your
information in the My Certificate Create screen. Make sure that the certification authority
information is correct and that your Internet connection is working properly if you want the
WiMAX Modem to enroll a certificate online.
CA Server Address This field applies when you select Create a certification request and enroll
for a certificate immediately online. Enter the IP address (or URL) of the
certification authority server.
For a URL, you can use up to 511 of the following characters. a-zA-Z0-9'()+,/
:.=?;!*#@$_%-
CA Certificate This field applies when you select Create a certification request and enroll
for a certificate immediately online. Select the certification authority’s
certificate from the CA Certificate drop-down list box.
You must have the certification authority’s certificate already imported in the
Trusted CAs screen. Click Trusted CAs to go to the Trusted CAs screen
where you can view (and manage) the WiMAX Modem's list of certificates of
trusted certification authorities.
Request
Authentication
When you select Create a certification request and enroll for a certificate
immediately online, the certification authority may want you to include a
reference number and key to identify you when you send a certification
request.
Fill in both the Reference Number and the Key fields if your certification
authority uses CMP enrollment protocol. Just the Key field displays if your
certification authority uses the SCEP enrollment protocol.
For the reference number, use 0 to 99999999.
For the key, use up to 31 of the following characters. a-zA-Z0-
9;|`~!@#$%^&*()_+\{}':,./<>=-
Apply
Click to save your changes.
Cancel
Click to return to the previous screen without saving your changes.
Table 60 TOOLS > Certificates > My Certificates > Create
LABEL DESCRIPTION