User`s guide

Chapter 12 The Phone Screens
User’s Guide
128
12.3 Common
Click VOICE > Phone > Common to activate and deactivate immediate dialing.
Figure 72 VOICE > Phone > Common
The following table describes the labels in this screen.
G.168 Active Select this if you want to eliminate the echo caused by the sound of your voice
reverberating in the telephone receiver while you talk.
Dialing Interval Select
Dialing Interval
Select
Enter the number of seconds the WiMAX Modem should wait after you stop dialing
numbers before it makes the phone call. The value depends on how quickly you
dial phone numbers.
If you select Active Immediate Dial in VOICE > Phone > Common, you can
press the pound key (#) to tell the WiMAX Modem to make the phone call
immediately, regardless of this setting.
VAD Support Select this if the WiMAX Modem should stop transmitting when you are not
speaking. This reduces the bandwidth the WiMAX Modem uses.
Back Click this to return to the Analog Phone screen without saving your changes.
Apply
Click to save your changes.
Reset
Click to restore your previously saved settings.
Table 50 VOICE > Phone > Analog Phone > Advanced
LABEL DESCRIPTION
Table 51 VOICE > Phone > Common
LABEL DESCRIPTION
Active Immediate
Dial
Select this if you want to use the pound key (#) to tell the WiMAX Modem to make
the phone call immediately, instead of waiting the number of seconds you selected
in the Dialing Interval Select in VOICE > Phone > Analog Phone.
If you select this, dial the phone number, and then press the pound key if you do
not want to wait. The WiMAX Modem makes the call immediately.
Apply
Click to save your changes.
Reset
Click to restore your previously saved settings.