User`s guide

Chapter 12 The Phone Screens
User’s Guide
127
12.2.1 Advanced Analog Phone Setup
Click the Advanced button in VOICE > Phone > Analog Phone to edit advanced settings for
each phone port.
Figure 71 VOICE > Phone > Analog Phone > Advanced
The following table describes the labels in this screen.
Incoming Call apply to
SIP1 Select this if you want to receive phone calls for the SIP1 account on this phone
port. If you select more than one source for incoming calls, there is no way to
distinguish between them when you receive phone calls.
SIP2 Select this if you want to receive phone calls for the SIP2 account on this phone
port. If you select more than one source for incoming calls, there is no way to
distinguish between them when you receive phone calls.
Apply
Click to save your changes.
Reset
Click to restore your previously saved settings.
Advanced Setup
Click this to edit the advanced settings for this phone port. The Advanced Analog
Phone Setup screen appears.
Table 49 VOICE > Phone > Analog Phone
LABEL DESCRIPTION
Table 50 VOICE > Phone > Analog Phone > Advanced
LABEL DESCRIPTION
Voice Volume Control
Speaking Volume Enter the loudness that the WiMAX Modem uses for speech that it sends to the
peer device. -1 is the quietest, and 1 is the loudest.
Listening Volume Enter the loudness that the WiMAX Modem uses for speech that it receives from
the peer device. -1 is the quietest, and 1 is the loudest.
Echo Cancellation