User`s guide

Chapter 11 The Service Configuration Screens
User’s Guide
119
11.2.1.6 Custom Tones (IVR)
IVR (Interactive Voice Response) is a feature that allows you to use your telephone to interact
with the WiMAX Modem. The WiMAX Modem allows you to record custom tones for the
Caller Ringing Tone and On Hold Tone functions. The same recordings apply to both the
caller ringing and on hold tones.
Use the following steps if you would like to create new tones or change your tones:
1 Pick up the phone and press **** on your phone’s keypad and wait for the message that
says you are in the configuration menu.
2 Press a number from 1101~1108 on your phone followed by the # key.
3 Play your desired music or voice recording into the receiver’s mouthpiece. Press the #
key.
4 You can continue to add, listen to, or delete tones, or you can hang up the receiver when
you are done.
Do the following to listen to a custom tone:
1 Pick up the phone and press **** on your phone’s keypad and wait for the message that
says you are in the configuration menu.
2 Press a number from 1201~1208 followed by the # key to listen to the tone.
3 You can continue to add, listen to, or delete tones, or you can hang up the receiver when
you are done.
Do the following to delete a custom tone:
1 Pick up the phone and press **** on your phone’s keypad and wait for the message that
says you are in the configuration menu.
Caller Ringing
Tone
Select the tone you want people to hear when they call you. See
Custom Tones
(IVR)
on page 119 for information on how to record these tones.
On Hold
Enable Check this box if you want people to hear a customized recording when you put
them on hold.
On Hold Tone Select the tone you want people to hear when you put them on hold. See
Custom
Tones (IVR)
on page 119 for information on how to record these tones.
Back Click this to return to the SIP Settings screen without saving your changes.
Apply
Click to save your changes.
Reset
Click to restore your previously saved settings.
Table 45 VOICE > Service Configuration > SIP Settings > Advanced (continued)
LABEL DESCRIPTION
Table 46 Custom Tones Details
LABEL DESCRIPTION
Total Time for All Tones 128 seconds for all custom tones combined
Maximum Time per
Individual Tone
20 seconds
Total Number of Tones
Recordable
8
You can record up to eight different custom tones but the total time must
be 128 seconds or less.