User`s guide

Chapter 11 The Service Configuration Screens
User’s Guide
113
11.2 SIP Settings
Click VOICE > Service Configuration > SIP Setting to setup and maintain your SIP
account(s) in the WiMAX Modem. Your VoIP or Internet service provider should provide you
with your account information. You can also enable and disable each SIP account.
Figure 62 VOICE > Service Configuration > SIP Setting
The following table describes the labels in this screen.
Table 44 VOICE > Service Configuration > SIP Setting
LABEL DESCRIPTION
SIP Account
Select the SIP account you want to see in this screen. If you change this field, the
screen automatically refreshes.
SIP Settings
Active SIP
Account
Select this if you want the WiMAX Modem to use this account. Clear it if you do not
want the WiMAX Modem to use this account.
Number Enter your SIP number. In the full SIP URI, this is the part before the @ symbol.
You can use up to 127 printable ASCII characters.
SIP Local Port Enter the WiMAX Modem’s listening port number, if your VoIP service provider
gave you one. Otherwise, keep the default value.
SIP Server
Address
Enter the IP address or domain name of the SIP server provided by your VoIP
service provider. You can use up to 95 printable ASCII characters. It does not
matter whether the SIP server is a proxy, redirect or register server.
SIP Server
Port
Enter the SIP server’s listening port number, if your VoIP service provider gave
you one. Otherwise, keep the default value.