User`s guide

Chapter 10 The System Configuration Screens
User’s Guide
108
10.6 Restart
Click ADVANCED > System Configuration > Restart to reboot the WiMAX Modem
without turning the power off.
A Restarting the WiMAX Modem does not affect its configuration.
Figure 61 ADVANCED > System Configuration > Restart
The following table describes the labels in this screen.
10.6.1 The Restart Process
When you click Restart, the the process usually takes about two minutes. Once the restart is
complete you can log in again.
Table 43 ADVANCED > System Configuration > Firmware
LABEL DESCRIPTION
Restart Click this button to have the device perform a software restart. The Power LED
blinks as it restarts and the shines steadily if the restart is successful.
Note: Wait one minute before logging back into the WiMAX Modem
after a restart.