User`s guide

Chapter 10 The System Configuration Screens
User’s Guide
107
The following table describes the labels in this screen.
10.5.1 The Restore Configuration Process
When the WiMAX Modem restores a configuration file, the device automatically restarts. This
causes a temporary network disconnect.
A Do not turn off the device while configuration file upload is in progress.
If the WiMAX Modem’s IP address is different in the configuration file you selected, you may
need to change the IP address of your computer to be in the same subnet as that of the default
management IP address (192.168.5.1). See the Quick Start Guide or the appendices for details
on how to set up your computer’s IP address.
You might have to open a new browser to log in again.
If the upload was not successful, you are notified by Configuration Upload Error message:
Click Return to go back to the Configuration screen.
Table 42 ADVANCED > System Configuration > Configuration
LABEL DESCRIPTION
Backup Configuration
Backup Click this to save the WiMAX Modem’s current configuration to a file on your
computer. Once your device is configured and functioning properly, it is highly
recommended that you back up your configuration file before making configuration
changes. The backup configuration file is useful if you need to return to your
previous settings.
Restore Configuration
File Path Enter the location of the file you want to upload, or click Browse... to find it.
Browse Click this to find the file you want to upload.
Upload Click this to restore the selected configuration file.
Note: Do not turn off the device while configuration file upload is in
progress.
Back to Factory Defaults
Reset Click this to clear all user-entered configuration information and return the WiMAX
Modem to its factory defaults. There is no warning screen.