User`s guide

Chapter 10 The System Configuration Screens
User’s Guide
104
Click ADVANCED > System Configuration > Dynamic DNS to set up the WiMAX Modem
as a dynamic DNS client.
Figure 58 ADVANCED > System Configuration > Dynamic DNS
The following table describes the labels in this screen.
Table 40 ADVANCED > System Configuration > Dynamic DNS
LABEL DESCRIPTION
Dynamic DNS Setup
Enable Dynamic
DNS
Select this to use dynamic DNS.
Service Provider Select the name of your Dynamic DNS service provider.
Dynamic DNS
Type
Select the type of service that you are registered for from your Dynamic DNS
service provider.
Host Name
Enter the host name. You can specify up to two host names, separated by a
comma (",").
User Name
Enter your user name.
Password
Enter the password assigned to you.
Enable Wildcard
Option
Select this to enable the DynDNS Wildcard feature.
Enable offline
option
This field is available when CustomDNS is selected in the DDNS Type field.
Select this if your Dynamic DNS service provider redirects traffic to a URL that you
can specify while you are off line. Check with your Dynamic DNS service provider.
IP Address Update Policy
Use WAN IP
Address
Select this if you want the WiMAX Modem to update the domain name with the
WAN port's IP address.