User guide
Table Of Contents
- Table of Contents
- Welcome to XOHM
- Get Started
- Your XOHM Modem
- Install Your XOHM Modem Using the XOHM Modem Setup Assistant
- Alternate Method: Install Without the Modem Setup Assistant
- Telephone (VoIP) Settings
- Your XOHM Modem Settings
- Modem Configuration Interface Overview
- Advanced Menu
- Tools Menu
- Troubleshooting
- Troubleshooting
- User Information and Warranty
- Important User Information
- Manufacturer’s Warranty
- Index
22 Alternate Method: Install Without the Modem Setup Assistant
3.
Plug in the modem and connect it to your computer.
䡲 Insert the round end of the power adapter into the modem’s power port and plug
the other end into a power source. (The Power LED should illuminate.)
䡲 Insert one end of the supplied Ethernet cable to your computer and the other
end into the yellow
LAN 1 port. (The LAN 1 LED should illuminate.)
4. Check the modem’s indicator lights to confirm your WiMAX signal. It may take a
few moments for the signal to find your modem.
䡲 If the WiMAX Signal indicator is solid green, the modem is receiving a WiMAX
signal. Proceed to step 5.
䡲 If the WiMAX Signal indicator is blinking, try moving the modem to a different
location (nearer a window or away from other electronics). Wait several seconds at
each location to see if you’re getting a signal.
䡲 If you cannot acquire a WiMAX signal, call XOHM Care at 877-333-XOHM (9646).
Tip
For more information about signal strength, see “XOHM WiMAX Signal Strength” on
page20.
WiMAX
Signal
LAN 1 Power