User`s guide

ZyXEL MAX-200M1 Series User’s Guide
Chapter 6 Status Screens 63
6.2 Site Information
Click Status > Site Information to view this screen. This read-only screen shows information
about the ZyXEL Device’s connection with a WiMAX base station. To configure these
settings, go to the Network > WAN > WiMAX Frequency screen.
Registration This field displays the current registration status of the SIP account. You have to
register SIP accounts with a SIP server to use VoIP.
If the SIP account is already registered with the SIP server,
Click Unregister to delete the SIP account’s registration in the SIP server. This
does not cancel your SIP account, but it deletes the mapping between your SIP
identity and your IP address or domain name.
The second field displays Registered.
If the SIP account is not registered with the SIP server,
Click Register to have the ZyXEL Device attempt to register the SIP account with
the SIP server.
The second field displays the reason the account is not registered.
Inactive - The SIP account is not active. You can activate it in VoIP > SIP > SIP
Settings.
Register Fail - The last time the ZyXEL Device tried to register the SIP account
with the SIP server, the attempt failed. The ZyXEL Device automatically tries to
register the SIP account when you turn on the ZyXEL Device or when you activate
it.
URI This field displays the account number and service domain of the SIP account. You
can change these in VoIP > SIP > SIP Settings.
Table 6 Status Screen
LABEL DESCRIPTION