User`s guide

ZyXEL MAX-200M1 Series User’s Guide
62 Chapter 6 Status Screens
System Status
System Up
Time
This field displays how long the ZyXEL Device has been running since it last
started up. The ZyXEL Device starts up when you plug it in, when you restart it
(Maintenance > Tools > Restart), or when you reset it (see Section 2.1.2 on page
35).
Current Date/
Time
This field displays the current date and time in the ZyXEL Device. You can change
this in Maintenance > System > Time Setting.
CPU Usage This field displays what percentage of the ZyXEL Device’s processing ability is
currently being used. The higher the CPU usage, the more likely the ZyXEL Device
is to slow down. You can reduce this by disabling some services, such as DHCP,
NAT, or content filtering.
Memory
Usage
This field displays what percentage of the ZyXEL Device’s memory is currently
used. The higher the memory usage, the more likely the ZyXEL Device is to slow
down. Some memory is required just to start the ZyXEL Device and to run the web
configurator. You can reduce the memory usage by disabling some services (see
CPU Usage); by reducing the amount of memory allocated to NAT and firewall
rules (you may have to reduce the number of NAT rules or firewall rules to do so);
or by deleting rules in functions such as incoming call policies, speed dial entries,
and static routes.
IVR Usage This field displays what percentage of the ZyXEL Device’s IVR memory is currently
used. IVR (Interactive Voice Response) refers to the customizable ring tone and
on-hold music you set. See Section 10.1.11 on page 111 for more information.
Interface Status
Interface This column displays each interface of the ZyXEL Device.
Status This field indicates whether or not the ZyXEL Device is using the interface.
For the WAN interface, this field displays Up when the ZyXEL Device is connected
to a WiMAX network, and Down when the ZyXEL Device is not connected to a
WiMAX network.
For the LAN interface, this field displays Up when the ZyXEL Device is using the
interface and Down when the ZyXEL Device is not using the interface.
Rate For the LAN ports this displays the port speed and duplex setting.
For the WAN interface, it displays the downstream and upstream transmission rate
or N/A if the ZyXEL Device is not connected to a base station.
Summary
Any IP Table Click this link to view a list of IP addresses and MAC addresses of computers
connected to the ZyXEL Device but not in the same subnet.
Packet
Statistics
Click this link to view port status and packet specific statistics.
DHCP Table Click this link to see details of computers to which the ZyXEL Device has given an
IP address.
VoIP Statistics Click this link to view statistics about your VoIP usage.
VoIP Status
Account This column displays each SIP account in the ZyXEL Device.
Table 6 Status Screen
LABEL DESCRIPTION