User`s guide

ZyXEL MAX-200M1 Series User’s Guide
60 Chapter 6 Status Screens
Each field is described in the following table.
Table 6 Status Screen
LABEL DESCRIPTION
Refresh Interval Enter how often you want the ZyXEL Device to update this screen.
Refresh Now Click this to update this screen immediately.
Device Information
System Name This field displays the ZyXEL Device system name. It is used for identification. You
can change this in the Maintenance > System > General screen’s System Name
field.
Firmware
Version
This field displays the current version of the firmware inside the device. It also
shows the date the firmware version was created. You can change the firmware
version by uploading new firmware in Maintenance > Tools > Firmware.
WAN Information
IP Address This field displays the current IP address of the ZyXEL Device in the WAN.
IP Subnet
Mask
This field displays the current subnet mask on the WAN.
DHCP This field displays what DHCP services the ZyXEL Device is using in the WAN.
Choices are:
Client - The ZyXEL Device is a DHCP client in the WAN. Its IP address comes
from a DHCP server on the WAN.
None - The ZyXEL Device is not using any DHCP services in the WAN. It has a
static IP address.
If you are not using Roadrunner on Ethernet, you can change this in Network >
WAN. If you are using Roadrunner on Ethernet, this is controlled by Roadrunner.
LAN Information
IP Address This field displays the current IP address of the ZyXEL Device in the LAN.
IP Subnet
Mask
This field displays the current subnet mask in the LAN.
DHCP This field displays what DHCP services the ZyXEL Device is providing to the LAN.
Choices are:
Server - The ZyXEL Device is a DHCP server in the LAN. It assigns IP addresses
to other computers in the LAN.
Relay - The ZyXEL Device is routing DHCP requests to one or more DHCP
servers. The DHCP server(s) may be on another network.
None - The ZyXEL Device is not providing any DHCP services to the LAN.
You can change this in Network > LAN > DHCP Setup.
WiMAX
Information
Operator ID Every WiMAX service provider has a unique Operator ID number, which is
broadcast by each base station it owns. You can only connect to the Internet
through base stations belonging to your service provider’s network.
BSID This field displays the identification number of the wireless base station to which
the ZyXEL Device is connected. Every base station transmits a unique BSID,
which identifies it across the network.
Cell ID A base station’s coverage area can be divided into multiple cells. This field shows
the identification number of the cell in which the ZyXEL Device is connected.
Frequency This field displays the radio frequency of the ZyXEL Device’s wireless connection
to a base station.