User`s guide

ZyXEL MAX-200M1 Series User’s Guide
44 Chapter 3 Tutorial
• Set up hardware connections from the ZyXEL Device to your computer, your telephone
and the power supply (see the Quick Start Guide for more details on hardware
connections).
• Set up your Internet access and WiMAX settings on the ZyXEL Device (see Section 3.1.1
on page 41 and Section 3.1.2 on page 42 for examples).
• Set up an account with a Voice over IP (VoIP) provider. This account (called a SIP
account) allows you to make calls over the Internet. See Chapter 10 on page 105 for more
information on SIP accounts.
Use the sections below to set up your SIP account and speed dialing, and place a VoIP call.
3.2.1 Configure Your SIP Account
Your ZyXEL Device needs to be configured with the details of your SIP account before you
can use it to make calls over the Internet. In this example, your SIP identity is
“[e-mail]”, your user name is “id123” and your password is “zyx987”. Your VoIP
provider has told you that the SIP server address is “sipserver-abcvoip.com”. See Section
10.1.3 on page 105 for more information on SIP identities.
Once you have connected the ZyXEL Device to your computer and accessed the Web
Configurator (see the Quick Start Guide for details) follow the steps below to configure your
SIP settings.
1 In the Web Configurator, click VoIP > SIP in the navigation panel.
The following screen displays. This screen is where you enter your SIP account details.
Figure 12 Tutorial: SIP Account Setup
2 Select SIP1 from the SIP Account list and make sure that the Active SIP Account box
is selected.