User`s guide

ZyXEL MAX-200M1 Series User’s Guide
Chapter 3 Tutorial 43
Figure 11 Tutorial: WiMAX Frequency Setup
2 Enter the frequency settings your ISP gave you in the DL Frequency fields. Note that
these fields are in kilohertz (kHz).
2.55 GHz is equal to 2550000 kHz, so enter 2550000 in the DL Frequency [0] field.
2.56 GHz is equal to 2560000 kHZ, so enter 2560000 in the DL Frequency [1] field.
3 Click Apply to save your settings. The ZyXEL Device scans for an available wireless
connection at the DL Frequency [0] setting (2.55 GHz) and, if it does not find an
available connection, searches at the DL Frequency [1] setting (2.56 GHz). When it
finds an available connection, the fields in this screen will be automatically set to use that
frequency.
For an example of using the WiMAX Frequency screen to configure more frequencies,
see Section 7.4.2.1 on page 77.
4 Look at the LEDs on your ZyXEL Device. When the ZyXEL Device successfully
connects to a base station, the LINK LED shines green steadily. The SIGNAL 1 ~ 5
LEDs indicate the signal strength, with SIGNAL 5 showing a very strong signal and
SIGNAL 1 showing a very weak signal.
5 Open your Internet browser and enter http://www.zyxel.com or the URL of any other web
site in the address bar. If you are able to access the web site, your wireless connection is
successfully configured. If you cannot access the web site, check the Troubleshooting
section of this User's Guide.
3.2 Make a Telephone Call Over the Internet
To make a call over the Internet using the ZyXEL Device, first do the following things: