User`s guide

ZyXEL MAX-200M1 Series User’s Guide
38 Chapter 2 Introducing the Web Configurator
Phone Book Incoming Call
Policy
Use this screen to configure call-forwarding.
Speed Dial Use this screen to configure speed dial for SIP phone numbers that you call
often.
Security
Firewall General Use this screen to activate/deactivate the firewall and the default action to
take on network traffic going in specific directions.
Services Use this screen to set the days and times for your device to perform service
blocking.
Content Filter Filter Use this screen to block sites containing certain keywords in the URL,
exclude a range of users on the LAN from content filtering on your ZyXEL
Device and restrict certain web features.
Schedule Use this screen to set the days and times for your ZyXEL Device to perform
content filtering.
Management
Static Route IP Static Route Use this screen to configure IP static routes to tell your device about
networks beyond the directly connected remote nodes.
Remote MGMT WWW Use this screen to configure through which interface(s) and from which IP
address(es) users can use HTTP to manage the ZyXEL Device.
Teln e t Use this screen to configure through which interface(s) and from which IP
address(es) users can use Telnet to manage the ZyXEL Device.
FTP Use this screen to configure through which interface(s) and from which IP
address(es) users can use FTP to access the ZyXEL Device.
SNMP Use this screen to configure your ZyXEL Device’s settings for Simple
Network Management Protocol management.
DNS Use this screen to configure through which interface(s) and from which IP
address(es) users can send DNS queries to the ZyXEL Device.
Security Use this screen to set whether or not your device will respond to pings and
probes for services that you have not made available.
UPnP General Use this screen to turn UPnP on or off.
Maintenance
System General This screen contains administrative and system-related information and
also allows you to change your password.
Dynamic DNS Use this screen to set up Dynamic DNS.
Time Setting Use this screen to change your ZyXEL Device’s time and date.
Logs View Log Use this screen to display your device’s logs.
Log Settings Use this screen to select which logs and/or immediate alerts your device is
to record. You can also set it to e-mail the logs to you.
Tools Firmware Use this screen to upload firmware to your device.
Configuration Use this screen to backup and restore your device’s configuration (settings)
or reset the factory default settings.
Restart This screen allows you to reboot the ZyXEL Device without turning the
power off.
Table 4 Navigation Panel Summary
LINK TAB FUNCTION