User`s guide

ZyXEL MAX-200M1 Series User’s Guide
Chapter 1 Getting Started 31
1.2 ZyXEL Device Hardware
Follow the instructions in the Quick Start Guide to make hardware connections.
1.2.1 LEDs
The following figure shows the LEDs (lights) on the ZyXEL Device.
Figure 3 The ZyXEL Device
The following table describes your ZyXEL Device’s LEDs.
Table 2 The ZyXEL Device
LED STATE DESCRIPTION
PWR OFF The ZyXEL Device is not receiving power.
RED The ZyXEL Device is receiving power but has been unable to start
up correctly. See the Troubleshooting section for more information.
RED / ORANGE
(BLINKING)
The ZyXEL Device is starting up.
GREEN The ZyXEL Device is receiving power and functioning correctly.
GREEN (BLINKING) The ZyXEL Device is performing a self-test.