User`s guide

ZyXEL MAX-200M1 Series User’s Guide
Chapter 20 System 203
Figure 121 Maintenance > System > Time Setting
Each field is described in the following table.
Table 85 Maintenance > System > Time Setting
LABEL DESCRIPTION
Current Time and
Date
This section displays the current date and time.
Time and Date
Setup
Manual Select this if you want to specify the current date and time in the fields below.
New Time Enter the new time in this field, and click Apply.
New Date
Enter the new date in this field, and click Apply.
Get from Time
Server
Select this if you want to use a time server to update the current date and time in
the ZyXEL Device.
Time Protocol Select the time service protocol that your time server uses.Check with your ISP or
network administrator, or use trial-and-error to find a protocol that works.
Daytime (RFC 867) - This format is day/month/year/time zone.
Time (RFC 868) - This format displays a 4-byte integer giving the total number of
seconds since 1970/1/1 at 0:0:0.
NTP (RFC 1305) - This format is similar to Time (RFC 868).
Time Server
Address
Enter the IP address or URL of your time server. Check with your ISP or network
administrator if you are unsure of this information.
Time Zone Setup
Time Zone Select the time zone at your location.