User`s guide

ZyXEL MAX-200M1 Series User’s Guide
192 Chapter 19 Tools
Figure 109 Maintenance > Tools > Firmware
Each field is described in the following table.
19.2.2 Firmware Upload Screens
Note: Do not turn off the device while firmware upload is in progress!
When the ZyXEL Device starts to upload firmware, the Firmware Upload in Process screen
appears.
Figure 110 Firmware Upload In Process
The process usually takes about two minutes. The device automatically restarts in this time.
This causes a temporary network disconnect. In some operating systems, you may see the
following icon on your desktop.
Table 80 Maintenance > Tools > Firmware
LABEL DESCRIPTION
File Path Enter the location of the .bin file you want to upload, or click Browse... to find it.
You must decompress compressed (.zip) files before you can upload them.
Browse... Click this to find the .bin file you want to upload.
Upload Click this to begin uploading the selected file. This may take up to two minutes.
See Section 19.2.2 on page 192 for more information about this process.
Note: Do not turn off the device while firmware upload is in
progress!