User`s guide

ZyXEL MAX-200M1 Series User’s Guide
Chapter 16 Remote MGMT 155
16.2.2 Telnet Screen
Use this screen to control Telnet access to your ZyXEL Device. To access this screen, click
Management > Remote MGMT > Telnet.
Figure 86 Management > Remote MGMT > Telnet
Each field is described in the following table.
16.2.3 FTP Screen
Use this screen to control FTP access to your ZyXEL Device. To access this screen, click
Management > Remote MGMT > FTP.
Apply Click this to save your changes.
Reset Click this to set every field in this screen to its default value.
Table 50 Management > Remote MGMT > WWW
LABEL DESCRIPTION
Table 51 Management > Remote MGMT > Telnet
LABEL DESCRIPTION
Server Port Enter the port number this service can use to access the ZyXEL Device. The
computer must use the same port number.
Server Access Select the interface(s) through which a computer may access the ZyXEL Device
using this service.
Secured Client IP
Address
Select All to allow any computer to access the ZyXEL Device using this service.
Select Selected to only allow the computer with the IP address that you specify to
access the ZyXEL Device using this service.
Apply
Click this to save your changes.
Reset Click this to set every field in this screen to its default value.