User`s guide

Chapter 6 Home Networking
ericom D1000 modem User’s Guide
84
Figure 44 Network Setting > Home Networking > UPnP
The following table describes the labels in this screen.
6.6 The IPv6 LAN Setup Screen
Use this screen to configure the IPv6 settings for your Device’s LAN interface.
Table 25 Network Setting > Home Networking > UPnP
LABEL DESCRIPTION
UPnP Select Enable to activate UPnP. Be aware that anyone could use a UPnP application to
open the web configurator's login screen without entering the Device's IP address
(although you must still enter the password to access the web configurator). Otherwise,
select Disable to deactivate UPnP.
Apply Click Apply to save your changes.
Cancel Click Cancel to exit this screen without saving.