User`s guide

Chapter 6 Home Networking
ericom D1000 modem User’s Guide
82
Use this screen to change your Device’s static DHCP settings. Click Network Setting > Home
Networking > Static DHCP to open the following screen.
Figure 41 Network Setting > Home Networking > Static DHCP
The following table describes the labels in this screen.
If you click Add new static lease in the Static DHCP screen or the Edit icon next to a static DHCP
entry, the following screen displays.
Figure 42 Static DHCP: Add/Edit
The following table describes the labels in this screen.
Table 22 Network Setting > Home Networking > Static DHCP
LABEL DESCRIPTION
Add new static lease Click this to add a new static DHCP entry.
# This is the index number of the entry.
Active This field displays whether the client is connected to the Device.
MAC Address The MAC (Media Access Control) or Ethernet address on a LAN (Local Area Network) is
unique to your computer (six pairs of hexadecimal notation).
A network interface card such as an Ethernet adapter has a hardwired address that is
assigned at the factory. This address follows an industry standard that ensures no other
adapter has a similar address.
IP Address This field displays the IP address relative to the # field listed above.
Modify Click the Edit icon to have the IP address field editable and change it.
Click the Delete icon to delete a static DHCP entry. A window displays asking you to
confirm that you want to delete the selected entry.
Table 23 Static DHCP: Add/Edit
LABEL DESCRIPTION
MAC Address If you select Manual Input in the Select Device Info field, enter the MAC address of
a computer on your LAN.
IP Address If you select Manual Input in the Select Device Info field, enter the IP address that
you want to assign to the computer on your LAN with the MAC address that you will
also specify.
OK Click OK to save your changes.
Cancel Click Cancel to exit this screen without saving.