User`s guide

Chapter 3 The System Info Screen
ericom D1000 modem User’s Guide
29
3.3 The LAN Device Screen
Click LAN Device in the System Info screen to view the information of the client(s) connected to
the Device. In this screen, you can configure how often you want the Device to update this screen
in Refresh Interval.
3G Rate This shows the rate of the 3G connection if it is available.
3G IP Address This shows the IP address for the 3G connection.
3G IP Subnet
Mask
This shows the current subnet mask for the 3G connection.
3G Gateway This shows the IP address of the 3G connection’s default gateway.
3G Primary/
Secondary DNS
This shows the first and second DNS server address assigned by the ISP.
Local Network
LAN1
LAN2
LAN3
LAN4
This displays the link speed and duplex mode of the LAN port(s) in use.
(LAN1 is reserved for Ethernet WAN.)
Modem Address This field displays the current IP address of the Device in the LAN.
Modem Subnet
Mask
This field displays the current subnet mask in the LAN.
IPv6 Address This is the current IPv6 address of the Device in the LAN. Click this to go to the screen
where you can change it.
IPv6 Prefix This is the current IPv6 prefix length in the LAN.
IPv6 Prefix This is the current IPv6 prefix in the LAN.
DHCP This field displays what DHCP services the Device is providing to the LAN. Choices are:
Server - The Device is a DHCP server in the LAN. It assigns IP addresses to other
computers in the LAN.
Relay - The Device acts as a surrogate DHCP server and relays DHCP requests and
responses between the remote server and the clients.
None - The Device is not providing any DHCP services to the LAN.
DHCP Range This is the IP address range that the Device is assigning to other computers in the LAN
when it acts as a DHCP server.
Firewall This shows the security level setting of the Device’s firewall.
Wireless Status This displays whether wireless LAN is turned on or off.
SSID This is the descriptive name used to identify the Device in the wireless LAN.
Channel This is the channel number used by the Device now.
Security Mode This displays the type of security the Device is using in the wireless LAN.
Key This displays the wireless key of the Device.
WPS Configured displays when the WPS security settings have been configured and wireless
clients can connect with the device through WPS. Unconfigured displays when the
device has not been configured and wireless clients can’t establish a link with the device
through WPS.
Table 2 System Info Screen (continued)
LABEL DESCRIPTION