User`s guide

Chapter 2 Introducing the Web Configurator
ericom D1000 modem User’s Guide
23
Filter IP/MAC Filter Use this screen to configure IPv4/MAC filtering rules for incoming
or outgoing traffic.
IPv6/MAC Filter Use this screen to configure IPv6/MAC filtering rules for incoming
or outgoing traffic.
Firewall General Use this screen to activate/deactivate the firewall.
Default Action Use this screen to set the default action that the firewall takes on
packets that do not match any of the firewall rules.
Rules Use this screen to view the configured firewall rules and add, edit
or remove a firewall rule.
DoS Use this screen to set the thresholds that the Device uses to
determine when to start dropping sessions that are not fully
established (half-open sessions).
Parental Control Parental Control Use this screen to define time periods and days during which the
Device performs parental control and/or block web sites with the
specific URL.
Certificates Local Certificates Use this screen to export self-signed certificates or certification
requests and import the Device’s CA-signed certificates.
Trusted CA Use this screen to save CA certificates to the Device.
System Monitor
Log Log Use this screen to view the logs for the level that you selected.
You can export or e-mail the logs.
Traffic Status WAN Use this screen to view the status of all network traffic going
through the WAN port of the Device.
LAN Use this screen to view the status of all network traffic going
through the LAN ports of the Device.
NAT Use this screen to view the status of NAT sessions on the Device.
Maintenance
Users Account Users Account Use this screen to configure the passwords your user accounts.
System System Use this screen to configure management inactivity time-out
setting.
Time Setting Time Setting Use this screen to change your Device’s time and date.
Log Setting Log Setting Use this screen to configure the Device’s log settings and which
logs and/or immediate alerts the Device is to record.
Firmware
Upgrade
Firmware Upgrade Use this screen to upload firmware to your Device.
Backup/Restore Backup/Restore Use this screen to backup and restore your device’s configuration
(settings) or reset the factory default settings.
Reboot Reboot Use this screen to reboot the Device without turning the power
off.
Remote MGMT WWW, Telnet, FTP,
SNMP, DNS, ICMP,
SSH
Use this screen to enable specific traffic directions for specific
network service.
Diagnostic Ping Use this screen to test the connections to other devices.
DSL Line Use this screen to identify problems with the DSL connection.
Table 1 Navigation Panel Summary (continued)
LINK TAB FUNCTION