User`s guide

ericom D1000 modem User’s Guide 205
CHAPTER 25
Diagnostic
25.1 Overview
These read-only screens display information to help you identify problems with the Device.
25.1.1 What You Can Do in the Diagnostic Screens
•Use the Ping screen (Section 25.2 on page 205) to ping an IP address.
•Use the DSL Line screen (Section 25.3 on page 206) to view the DSL line statistics and reset the
ADSL line.
25.2 The General Screen
Use this screen to ping an IP address. Click Maintenance > Diagnostic > Ping to open the screen
shown next.
Figure 142 Maintenance > Diagnostic > Ping
The following table describes the fields in this screen.
Table 87 Maintenance > Diagnostic > Ping
LABEL DESCRIPTION
Type the IP address of a computer that you want to ping in order to test a connection.
Ping Click this to ping the IP address that you entered.
PingV6 Click this to ping the IPv6 address that you entered.