User`s guide

Chapter 24 Remote Management
ericom D1000 modem User’s Guide
203
Figure 140 Maintenance > RemoteMGMT > ICMP
The following table describes the labels in this screen.
24.8 The SSH Screen
You can use Secure SHell (SSH) to securely access the Device’s command line interface. Specify
which interfaces allow SSH access and from which IP address the access can come. SSH is a secure
communication protocol that combines authentication and data encryption to provide secure
encrypted communication between two hosts over an unsecured network.
Click Maintenance > RemoteMGMT > SSH tab to display the screen as shown.
Table 85 Maintenance > RemoteMGMT > ICMP
LABEL DESCRIPTION
Respond to Ping on The Device will not respond to any incoming Ping requests when Disable is selected.
Select LAN to reply to incoming LAN Ping requests. Select WAN to reply to incoming
WAN Ping requests. Otherwise select LAN & WAN to reply to both incoming LAN and
WAN Ping requests.
Secured Client IP
Address
A secured client is a “trusted” computer that is allowed to send Ping requests to the
Device.
Select All to allow any computer to send Ping requests to the Device.
Choose Range to just allow the computer(s) with an IP address in the range that you
specify to send Ping requests to the Device.
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.