User`s guide

ericom D1000 modem User’s Guide 181
CHAPTER 19
System Setting
19.1 Overview
This chapter shows you how to configure the inactivity timeout interval.
19.2 The System Screen
Use this screen to configure system admin password.
Click Maintenance > System to open the screen as shown.
Figure 123 Maintenance > System
The following table describes the labels in this screen.
Table 75 Maintenance > System
LABEL DESCRIPTION
Administrator
Inactivity Timer
Type how many seconds a management session (either via the web configurator) can be
left idle before the session times out and you have to log in again. Very long idle timeouts
may have security risks. A value of "0" means a management session never times out, no
matter how long it has been left idle (not recommended).
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.