User`s guide

ericom D1000 modem User’s Guide 175
CHAPTER 17
Traffic Status
17.1 Overview
Use the Traffic Status screens to look at network traffic status and statistics of the WAN, LAN
interfaces and NAT.
17.1.1 What You Can Do in this Chapter
•Use the WAN screen to view the WAN traffic statistics (Section 17.2 on page 175) .
•Use the LAN screen to view the LAN traffic statistics (Section 17.3 on page 176).
•Use the NAT screen to view the NAT status of the Device’s client(s) (Section 17.4 on page 177).
17.2 The WAN Status Screen
Click System Monitor > Traffic Status to open the WAN screen. You can view the WAN traffic
statistics in this screen.
Figure 119 System Monitor > Traffic Status > WAN
The following table describes the fields in this screen.
Table 71 System Monitor > Traffic Status > WAN
LABEL DESCRIPTION
Status This shows the number of bytes received and sent through the WAN interface of the Device.
Refresh Interval Enter how often you want the Device to update this screen from the drop-down list box.
Set Interval Click this button to apply the new poll interval you entered in the Refresh Interval field.
Stop Click Stop to stop refreshing statistics.
Connected
Interface
This shows the name of the WAN interface that is currently connected.