User`s guide

Chapter 10 Port Isolation
ericom D1000 modem User’s Guide
137
Figure 94 Network Setting > Port Isolation > Port Isolation
The following table describes the labels in this screen.
10.3.1 Port Isolation Summary Screen
Use this screen to view configured port isolation groups.
In the Port Isolation screen, click the Port Isolation Summary button in the Group Summary
section to display the following screen.
Table 50 Network Setting > Port Isolation > Port Isolation
LABEL DESCRIPTION
Port Isolation
Active Activate or deactivate port isolation for the port isolation group.
Group Index Select the index number for the port isolation group.
When a port is assigned to a port isolation group, traffic will be forwarded to the other
ports in the group, but not to ports in other groups. If a port is not included in any
groups, traffic will be forwarded according to the routing table.
ATM VCs Select the ATM VC (PVC) to include in the port isolation group. Each ATM VC can only
be bound to one group.
Ethernet Select the Ethernet (Eth) ports to include in the port isolation group. Each Ethernet
port can only be bound to one group.
Wireless LAN Select the WLAN (AP) connection to include in the port isolation group. Additional APs
can be enabled on the More AP screen (Section 5.3 on page 54).
Group Summary
Port Isolation
Summary
Click this to view a summary of configured port isolation groups.
Apply Add the selected port isolation group configuration.
Delete Delete the selected port isolation group configuration.
Cancel Click this to restore your previously saved settings.