User`s guide

ZyAIR G-5100
4
1 Use the included spanner
(installation tool) to
connect the ground cable
to the ZyAIR’s frame
ground (as shown).
Connect the other end of
the ground cable to an
appropriate grounding
system.
2 Remove the backing from
both sides of the
waterproofing strip.
3 Stretch the waterproofing
strip.
4 Wrap the waterproofing
strip around the base of
the antenna connector.
5 Screw the supplied
antennas clockwise onto
the antenna connectors on
the top and bottom of your
ZyAIR.
Note: Do not over-tighten
the antennas.