User`s guide

ZyAIR G-5100

5.1 Set Up Your Computer’s IP Address

This section shows you how to assign your computer a static IP address in the 192.168.5.2 to 192.168.5.254

range with a subnet mask of 255.255.255.0. This is ensures that your computer can communicate with your

Prestige. The following instructions are for the Windows 2000, Windows NT and Windows XP operating

systems.

1 In Windows XP, click Start, Control Panel.

In Windows 2000/NT, click Start, Settings, Control

Panel.

2 In Windows XP, click Network Connections.

In Windows 2000/NT, click Network and Dial-up

Connections.

3 Right-click Local Area Connection and then click

Properties.

4 Select Internet Protocol (TCP/IP) (under the

General tab in Windows XP) and click Properties.

5 The Internet Protocol TCP/IP Properties screen

opens (the General tab in Windows XP).

6 Select Use the following IP address and fill in the IP

address (choose one from192.168.1.3 to

192.168.1.254), Subnet mask (255.255.255.0), and

Default gateway (192.168.5.1) fields.

7 Click OK to close the Internet Protocol (TCP/IP)

Properties window.

8 Click Close (OK in Windows 2000/NT) to close the

Local Area Connection Properties window.

9 Close the Network Connections screen.

5.2 Procedure to View a Product’s Certification(s)

1 Go to www.zyxel.com.

2 Select your product from the drop-down list box on the ZyXEL home page to go to that product's page.

3 Select the certification you wish to view from this page.

I cannot ping any

computer on the LAN.

If all of the inline power injector LEDs are off, check the cables between the ZyAIR and

your computer or hub.

I cannot access the

Internet.

Make sure the ZyAIR is connected to the network.

Make sure you entered your username correctly. A username may be case-sensitive.

Problem Corrective Action