User`s guide

G-3000H User’s Guide
98 Chapter 7 Multiple ESS, SSID and VLAN
7.2.1 Configuring SSID
Configure appropriate fields in the Wireless, Security, RADIUS, MAC Filter, Layer-2
Isolation and VLAN screens to use those settings in the following screen. These settings can
be used instead of the default settings to create SSID profiles.
SSID This field displays the name of the wireless profile on the network. When a
wireless client scans for an AP to associate, this is the identity that is broadcast
and viewed in the wireless client utility.
VLAN This field displays the VLAN ID. Incoming traffic from the WAN is tagged with
this ID before it is sent to the LAN interface. Different SSID profiles can use the
same or different VLAN IDs. This allows you to split wireless stations into
groups using similar VLAN IDs.
Second Rx VLAN This field displays the identification number of incoming Ethernet frames that
are forwarded to this ESS. This number can be the same for many ESS
groups, depending on how many you want to be members of a particular
VLAN.
Security This field displays a security profile. See Configuring Security on page 80 for
more information.
RADIUS This field displays a RADIUS profile, if you have a RADIUS server configured.
QoS This field displays the Quality of Service setting for this profile.
Edit Click the radio button next to the profile you want to configure and click Edit to
go to the SSID configuration screen.
Table 29 SSID
LABEL DESCRIPTION