User`s guide

G-3000H User’s Guide
Chapter 6 Wireless Security Configuration 91
6.15 Configuring Local User Database
To change your ZyAIR’s local user database, click the WIRELESS link under ADVANCED
and then the Local User Database tab. The screen appears as shown.
Figure 38 Local User Database
The following table describes the labels in this screen.
Accounting Server IP
Address
Enter the IP address of the external accounting server in dotted decimal
notation.
Accounting Server Port Enter the port number of the external accounting server. The default port
number is 1813. You need not change this value unless your network
administrator instructs you to do so with additional information.
Share Secret Enter a password (up to 31 alphanumeric characters) as the key to be shared
between the external authentication server and the ZyAIR. The key must be
the same on the external authentication server and your ZyAIR. The key is not
sent over the network.
Apply Click Apply to save your changes back to the ZyAIR.
Reset Click Reset to begin configuring this screen afresh.
Table 26 RADIUS
LABEL DESCRIPTION
Table 27 Local User Database
LABEL DESCRIPTION
Active Select this check box to activate the user profile.
User Name Enter the username (up to 31 characters) for this user profile.
Password Type a password (up to 31 characters) for this user profile. Note that as you
type a password, the screen displays a (*) for each character you type.
Apply Click Apply to save your changes back to the ZyAIR.
Reset Click Reset to begin configuring this screen afresh.