User`s guide

G-3000H User’s Guide
78 Chapter 6 Wireless Security Configuration
Figure 29 WPA(2) with RADIUS Application Example
6.8 Security Modes
The following table describes the security modes you can configure.
Table 16 Security Modes
SECURITY MODE DESCRIPTION
None Select this to have no data encryption.
WEP Select this to use WEP encryption.
802.1x-Only Select this to use 802.1x authentication with no data encryption.
802.1x-Dynamic64 Select this to use 802.1x authentication with a dynamic 64bit WEP key.
802.1x-Dynamic128 Select this to use 802.1x authentication with a dynamic 128bit WEP key.
802.1x-Static64 Select this to use 802.1x authentication with a static 64bit WEP key and an
authentication server.
802.1x-Static128 Select this to use 802.1x authentication with a static 128bit WEP key and
an authentication server.
WPA-PSK Select this to use WPA with a pre-shared key.
WPA2-PSK Select this to use WPA2 with a pre-shared key.
WPA2-PSK-MIX Select this to use either WPA-PSK or WPA2-PSK depending on which
security mode the wireless client uses.
WPA Select this to use WPA.
WPA-MIX Select this to use either WPA or 802.1x Only depending on which security
mode the wireless client uses.
WPA2 Select this to use WPA2.